Thông số kỹ thuật Switch Cisco C9200L-48P-4G-E
Description |
Specifications |
Performance | |
Switching capacity |
104 Gbps |
Forwarding rate |
77.38 Mpps |
Virtual Networks |
1 |
Stacking bandwidth |
80 Gbps |
Total number of MAC addresses |
16,000 |
Total number of IPv4 routes (ARP plus learned routes) |
11,000 (8,000 direct routes and 3,000 indirect routes) |
IPv4 routing entries |
3,000 |
IPv6 routing entries |
1,500 |
Multicast routing scale |
1,000 |
QoS scale entries |
1,000 |
ACL scale entries |
1,500 |
Packet buffer per SKU |
6 MB buffers |
Flexible NetFlow (FNF) entries |
16,000 flows |
DRAM |
2 GB |
Flash |
4 GB |
VLAN IDs |
1024 |
Total Switched Virtual Interfaces (SVIs) |
512 |
Jumbo frames |
9198 bytes |
Wireless bandwidth per switch |
N/A |
Default primary power supply |
PWR-C5-1KWAC |
Available PoE power with single primary power supply only |
740W |
Optional secondary power supply |
PWR-C5-1KWAC |
Available PoE power with additional secondary power supply |
1440W |
Features |
|
Switch fundamentals | Layer 2, Routed Access (RIP, EIGRP Stub, OSPF – 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder |
Automation | NETCONF, RESTCONF, YANG, PnP Agent, PnP |
Telemetry and visibility | Model-driven telemetry, sampled NetFlow, SPAN, RSPAN |
Security | MACsec-128 |
Physical Specifications | |
Chassis Dimensions | 1.73 x 17.5 x 11.3 Inches 4.4 x 44.5 x 28.8 Centimeters |
weight | 10.58 Pounds 4.80 Kilograms |
Mean time between failures (hours) | 347,760 |
Connectors | |
Connectors and cabling |
– 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
– 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
– 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
– Cisco StackWise-80 stacking ports: copper-based Cisco StackWise cabling
– Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling
– Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor
|
Power connectors |
Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
|
Standards, Safety and compliance information | |
Standards |
EEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3af IEEE 802.3at IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification RMON I and II standards SNMPv1, v2c, and v3 |
Safety certifications |
– IEC 60950-1
– UL 60950-1
– CAN/CSA C22.2 No. 60950-1
– EN 60950-1
– AS/NZS 60950.1
– Class I Equipment
|
Electromagnetic emissions certifications |
– 47 CFR Part 15
– CISPR 22 Class A
– CISPR 32 Class A
– CNS 13438
– EN 300 386
– EN 55022 Class A
– EN 55032 Class A
– EN61000-3-2
– EN61000-3-3
– ICES-003 Class A
– KN 32
– TCVN 7189 Class A
– V-3 Class A
– CISPR 24
– EN 300 386
– EN 55024
– KN 35
– TCVN 7317
|
Environmental |
Reduction of Hazardous Substances (ROHS) 5
|
Hãy là người đầu tiên nhận xét “Thiết bị chuyển mạch Switch Cisco C9200L-48P-4G-E 48 Port PoE+, 4x1G, Network Essentials”