Cisco Catalyst 9130 Series Access Point WiFi 6 C9105AXI-S
Thông số kỹ thuật:
| Software | – Cisco Unified Wireless Network Software Release 8.10.MR3 or later – Cisco IOS XE Software Release 17.3.1, or later |
| Supported wireless LAN controllers |
– Cisco Catalyst 9800 Series Wireless Controllers
– Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
|
| 802.11n version 2.0 (and related) capabilities |
– 2×2 MIMO with two spatial streams
– Maximal Ratio Combining (MRC)
– 802.11n and 802.11a/g
– 20- and 40-MHz channels
– PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
– Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
– 802.11 Dynamic Frequency Selection (DFS)
– Cyclic Shift Diversity (CSD) support
|
| 802.11ac |
– 2×2 downlink MU-MIMO with two spatial streams
– MRC
– 802.11ac beamforming
– 20-, 40-, 80- MHz channels
– PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 DFS
– CSD support
– WPA3 support
|
| 802.11ax |
– 2×2 uplink/downlink MU-MIMO with two spatial streams
– Uplink/downlink OFDMA
– TWT
– BSS coloring
– MRC
– 802.11ax beamforming
– 20-, 40-, 80- channels
– PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 DFS
– CSD support
– WPA3 support
|
| Integrated antenna |
– 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
– 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
|
| Interfaces |
– 1x 10/100/1000 Base-T (Ethernet) Uplink Interface
– Management console port (RJ-45)
|
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) | 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm) |
| Weight | 0.7 lb. (329.5g) |
| Input power requirements |
– 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®)
– Cisco power injector, AIR-PWRINJ6=
– 802.3af PoE
– Cisco power injector, AIR-PWRINJ5=
|
| PoE power | 802.3af (PoE) |
| Link speed | 1G |
| Environmental |
– Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
– Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
– Operating temperature: 32° to 122°F (0° to 50°C)
– Operating humidity: 10% to 90% (noncondensing)
– Operating altitude test: 40˚C, 9843 ft.(3000 m)
|
| Available transmit power settings (Max/Min) | – 2.4 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW) – 5 GHz: 20 dBm (100 mW), -7 dBm (0.2 mW) |
Đánh giá
Chưa có đánh giá nào.
Hãy là người đầu tiên nhận xét “Cisco Catalyst 9130 Series Access Point WiFi 6 C9105AXI-S”